Live Help

Do you really believe there is a slab leak in your home? Frequent signs or symptoms include things like seeing or feeling wet areas on your floor. Particularly warm water spots. These may be found when walking in your home in your bare feet. One more symptom could be that the water bill is appreciably higher. This may be attributable to the fact that water is leaking under the pressure originating from the inward bound water line. This means that the water leaks day and night pretty much every single day. This drives your monthly water costs to be much higher. Another warning sign that is quite frequent is that it can sound like your water is running even when the faucets within your home are shut off.


The case of slab leaks started in the Southwest US in the 1980s. At the time home building firms and general contractors were building up people’s homes on big concrete slabs. The building contractors would pour a big concrete floor slab foundation and thereafter place in soft copper pipe when the cement was still wet. The pipes would run the full length and width of your slab as necessary in order to reach any place they needed to get water inside the house and based on the layout. The water line would protrude out of the concrete in whichever room the blueprint said would need water. For example, a pipe would stick up from the foundation at every bathroom, your kitchen and laundry room, to name a few.

The trouble with the thought of burying soft copper piping in the concrete framework was that the copper was not strong. Any kinking, folding, flexing, or nicking would weaken the water pipe and over time develop a pin hole leak. The pipes were very often broken through installation or the cementing process. Builders were not able to begin using hard copper because it was forbidden within building codes at that time.


The major cause of these leaks is worn out soft copper tubing. The worn out pipes begin pin hole leaks and turn into even bigger troubles of slab leaks. What is special related to these slab leaks is the fact they are in the cement foundation. A foundation leak, by it’s nature isn’t a painless pipe leak to fix.

Repair work choices

A person has three choices to fix foundation leaks. You can epoxy, jackhammer or repipe.

The jackhammer path is the least frequently used. It’s a remarkably troublesome procedure where the crew arrives and strips the floor and jackhammers through the bare concrete to locate the water line. A piece of your pipe surrounding the leak is removed and substituted with new pipe. New section of pipe is soldered into position utilizing a plumbing engineer who knows how to weld. When the new patch of pipe is positioned the water pressure is released to be sure it doesn’t leak. If it ultimately does not leak, then the concrete floor is remade and the flooring is reassembled.

Epoxy lining

Epoxy coating is the process in which the insides of the water lines are cleaned and then coated with epoxy. This closes up the damaged spot and prevents the leaking. It comes with the added benefit of perhaps heading off any future water leaks as the coating is applied to all of your pipes in the slab framework. An important problem with this procedure is because the coating itself becomes a problem in time. Coming loose after icy temperature conditions or weight pressure could get into the pipes and could cause medical concerns if swallowed.

PEX and Copper Repiping

The ideal choice is known as copper repiping. Repiping comes about when you essentially rebuild all the water pipes in the household apart from the soft copper pipe that’s buried inside the foundation. The completely new group of water pipes is set up in the house in the wall surfaces and ceilings, that forever bypasses the slab pipes.

Potential issues

The chance of doing nothing with your foundation leak is that the family home could be wet and contain mold spores. There will be hardly any water pressure and suddenly your water bills may be high. The risk is in not making the repair whatsoever. The risk of the jackhammer is quite significant. The danger of the jackhammer method is not really that it doesn’t work. The danger is you may need to make it happen more than once. You see, more often than not after you fix a single leak by using this method a fresh one occurs in just a few days. The possible potential for the Epoxy lining methodology is the Epoxy by itself has become a health concern. The best strategy should be to execute a repiping procedure. Very little risk is associated with copper or PEX repiping.

Price estimations

The primarily accepted wisdom is that you can anticipate paying around $1,500 per minimal leak repair service. Copper repiping offers a permenant solution to fixing and preventing active and long term future leaks for the life time of your house. You aren’t going to have to worry about it again.